Welcome!
This is the community forum for my apps Pythonista and Editorial.
For individual support questions, you can also send an email. If you have a very short question or just want to say hello — I'm @olemoritz on Twitter.
Using cb library to connect simultaneously multiple TI SensorTag via Bluetooth Low Energy
-
@ccc regarding this example so there I only can connect to one device at time?
@ccc said in Using cb library to connect simultaneously multiple TI SensorTag via Bluetooth Low Energy:
class MultipleDeviceManager(object): def __init__(self): self.peripherals = {} # dict of peripheral names and peripheral objects def did_discover_peripheral(self, p): if p.name not in self.peripherals: self.peripherals[p.name] = p print(f'Connecting to a new device: {p.name}...') cb.connect_peripheral(p) def connect_to_device(self, device_name): """May raise a KeyError""" cb.connect_peripheral(self.peripherals[device_name])
I believe that what @JonB is saying above is that your dict may hold information about several different devices but you can only
cb.connect_peripheral()
to one at a time. -
you might want to just store a list of peripherals. Then examine them, to see if there is anything unique about them, such as name, uuid, etc. Maybe iOS appends a unique integer to the name, not sure.
the corebluetooth delegate methods always include the peripheral, thus there is never any ambiguity to whom you would be talking.
writing values should be okay, since you provide the perioheral, but getting update notifications might be problematic, since the characteristic doesn't point back to the peripheral object, at least not in the docs, but you might want to check for private attributes. -
Do your devices have the same name or do they have different names?
If they have the same name then my solution above will not work but a solution that uses unique_name = f'{p.name}-{p.uuid}' would work.
Perhaps this discussion would be easier if you could discover a few devices and then print(self.peripherals) so that we can see the names.
-
This post is deleted! -
The names are the same, but I would have the chance to change it and set an individual device name. Anyway I need to change the names to distinguish each sensor node data. How do you meant that with using unique_name = f'{p.name}-{p.uuid}' ? Is this a combination of name + uuid? --> Should I replace it with the** self.peripherals[p.name] = p**? In the meantime I try to generate an output where a few devices are discovered.
-
f-strings are described at https://docs.python.org/3/reference/lexical_analysis.html#formatted-string-literals
They are new in Python 3.6 so the following are all equivalent:
$ python3.6 >>> class P(): ... name = 'name' ... uuid = 'uuid' ... >>> p = P() >>> f'{p.name}-{p.uuid}' 'name-uuid' >>> '{}-{}'.format(p.name, p.uuid) 'name-uuid' >>> '%s-%s' % (p.name, p.uuid) 'name-uuid' >>> '-'.join((p.name, p.uuid)) 'name-uuid' >>> p.name + '-' + p.uuid 'name-uuid'
So p.name is not unique and p.uuid is not descriptive but if we put p.name, hyphen, p.uuid together then we have a string that is both descriptive and unique.
-
Of course in Go, it would be:
package main import "fmt" type p_struct struct { name, uuid string } func main() { p := p_struct{"name", "uuid"} fmt.Printf("%v-%v", p.name, p.uuid) }
-
Thanks a will try it out :).
I have a question regarding the example of the SensorTag which is given in the documentation of cb:def did_discover_peripheral(self, p): print('+++ Discovered peripheral: %s (%s)' % (p.name, p.uuid)) if p.name and 'Sensor Tag' in p.name and not self.peripheral: # Keep a reference to the peripheral, so it doesn't get garbage-collected: self.peripheral = p cb.connect_peripheral(self.peripheral)
This is the function to detect peripherals which are advertising. In the if statement there is something which is a bit unclear. Does it mean that if p.name is available and SensorTag is in P.name is clear, but why not self.peripheral?
-
In the if statement there is something which is a bit unclear. Does it mean that if p.name is available and SensorTag is in P.name is clear, but why not self.peripheral?
The example connects to just one SensorTag, and that SensorTag is stored in the
self.peripheral
attribute, so theif not self.peripheral
condition means "ignore this if we already found it". As you want to connect to multiple SensorTags, you'd have to handle this differently, of course.@ccc's code from earlier should be a good starting point. You might just need to use UUIDs instead of names, if all your SensorTags have the same name (not sure if they do generally).
-
Hi,
okay thanks for the explanation. I will try it out. that means the dict {} stores the connected peripherals so that the central does not try to connect to them again. I saw that the dict {} in the code is empty, should this stay like this or can I define the names of the nodes to which I want to have the connection?
Regarding the name I can change the name of the SensorTag so that I could distinguish them -
When you start the dict is empty. Each time that did_discover_peripheral() is run, it will add a new entry in the dict if it is not already there.
-
@ProgrammingGo Please run the following with multiple SensorTags turned on and post the output here:
class MultipleDeviceManager(object): def __init__(self): self.by_name = {} # dict of peripheral names and peripheral objects self.by_uuid = {} # dict of peripheral uuids and peripheral objects def did_discover_peripheral(self, p): if p.name not in self.by_name: self.by_name[p.name] = p print(f'Connecting to a new device: {p.name}...') if p.uuid not in self.by_uuid : self.by_uuid[p.uuid] = p print(f'Connecting to a new device: {p.uuid}...') cb.connect_peripheral(p) print(f'{len(self.by_name)} unique names and {len(self.by_uuid)} unique uuids') def connect_to_device(self, device_name): """May raise a KeyError""" cb.connect_peripheral(self.by_name[device_name])
-
@ccc I tried it out with two tags ( using the same name for both tags) and I have the following output:
Output:
Connecting to new device: CC2650 SensorTag....
Connecting to new device: <UUID> (too long but was displayed)1 unique names and 1 unique uuids
Connecting to new device: <UUID> ---> only uuid was displayed because second SensorTag has same name
1 unique names and 2 unique uuids.
So logically I could use the uuid to have multiple sensor connected. I see the problem for the callback functions where I try to read out the sensor values or update it. For services it works, but to read out the same characteristics from both tags it is a problem. I would need to have a reference of the peripheral in the callback function did_discover_services. I wanted to modify the function, is there another way as workaround?
-
This is exactly what I anticipated that you would find... All these devices share a common name but each one has a unique UUID.
import cb class MultipleCC2650Manager(object): name = 'CC2650 SensorTag' # we only care about devices with this name def __init__(self): self.devices = {} # dict of peripheral uuids and peripheral objects def did_discover_peripheral(self, p): if p.name != self.name: return # ignore devices do not have the name 'CC2650 SensorTag' if p.uuid in self.devices: return # ignore devices that we have already discovered/registered self.devices[p.uuid] = p print(f'Connecting to a new device: {p.uuid}...') cb.connect_peripheral(p) print(f'{len(self.devices)} unique {self.name} devices') def connect_to_device(self, device_uuid): cb.connect_peripheral(self.devices[device_uuid])
-
One thing you have to watch out for is that if you are trying to do notify in characteristics, the callbacks dont tell you whch peripheral it came from. That is a major shortcoming in my mind of the cb implementation. You might be better off going to an objc_util based solution
-
@ccc Yeah thanks a lot. I understood it very well with your example. Thank you so much. So I need to work with the uuid of the devices. A question regarding the example given : you call cb.connect_peripheral(p) in did_discover_peripheral and then in def connect_to_device again,why?
delegate = MyCentralManagerDelegate() print('Scanning for peripherals...') cb.set_central_delegate(delegate) cb.scan_for_peripherals() # Keep the connection alive until the 'Stop' button is pressed: try: while True: pass except KeyboardInterrupt: # Disconnect everything: cb.reset()
This part is still needed right?
-
@JonB Ok thank you for your hint
-
did_discover_peripheral() will always leave you connected to the last device that it discovered. So when you want to chose which device that you want to connect to, you call connect_to_device().
-
@ccc Hi sorry for the question I am a bit confused. It is not clear to me how do you mean that :(. Can you explain it may be again? My target is to be connected to 3 SensorTags at the same time to receive data.
-
Let's say that you have 3 CC2650 SensorTags and their UUIDs are 0, 1, 2... Getting data would be:
data = [] # empty list for device_uuid in (0, 1, 2): cc2650_manager.connect_to_device(device_uuid) data.append(get_data()) print(data)
You can only talk to one device at a time but you can loop thru all the devices and call connect_to_device() and then get the data from that device.