Braille application.

but your list and the list of http://www.yoihari.com/tenji/tdaku.htm
are not the same.
Thus you have to give me the list of accepted characters for each prefix.

shinya.ta

@cvp

http://www.yoihari.com/tenji/tdaku.htm

This list is correct.

I need a Japanese speech for Pythonisa.

You can write the proper words on the Speech over the Japanese speech of PythonIsa and the Voice over the iPhone.

cvp

@shinya.ta said:

This list is correct.

I'm surprised, for instance,
are you're sure that ぎ is

I suppose that the list of existing dots is ok but the generated image would be different...

cvp

@shinya.ta Please confirm that this list and their graphical representation is correct
the dots are prefix 5 or 6 | normal dots

か が 5|16
き ぎ 5|126
く ぐ 5|146
け げ 5|1246
こ ご 5|246
さ ざ 5|156
し じ 5|1256
す ず 5|1456
せ ぜ 5|12456
そ ぞ 5|2456
た だ 5|135
ち ぢ 5|1235
つ づ 5|1345
て で 5|12345
と ど 5|2345
は ば 5|136
ひ び 5|1236
ふ ぶ 5|1346
へ べ 5|12346
ほ ぼ 5|2346
は ぱ 6|136
ひ ぴ 6|1236
ふ ぷ 6|1346
へ ぺ 6|12346
ほ ぽ 6|2346

for those who would be intellectually interested, I have generated that by a little script,
after having discovered that the only difference between this 6-dots prefix is the last half-byte to which is added 1 or a 2 (ex: x8b -> x8c)

def p(dots,prefix,ch):											# ex: 5,か
	d = 1 if prefix == '5' else 2				# ex: 5 -> 1           6 -> 2
	b = ch.encode('utf-8')							# ex: b'\xe3\x81\x8b'
	n = b[:-1] + bytes([int(b[-1])+d])	# ex: b'\xe3\x81\x8c'
	c = str(n,'utf-8')									# ex: か -> が          へ -> ぺ 
	print(ch,c,dots)
	
for ele in Japanese_Braille.keys():
	if '|' in ele:											# ex: 5|1345
		prefix = ele[0]										# ex: 5
		k = ele[2:]												# ex:	1345
		ch = Japanese_Braille[k]					# ex: つ
		p(ele,prefix,ch)

cvp

New Version 0.7

# Version 0.7
# - bug corrected: sqlite3 operationalerror accessing HiraganaToKanji.db
#                  was not intercepted
# - new: cursor left and right move buttons
# - new: support Hirgana with one/dot prefix for (han)dakuten

To input characters with dakuten or handakuten like が or ぴ

tap the prefix dot 5 or 6
tap ✅ to say that the dots are ended
the program recognizes this as a prefix and waits for a second dots set
tap all dots of normal character like 1236 for ひ
tap ✅
the accentuated hirgana is generated like ぴ

This version does not yet support speech, for this, I wait that you explain when and what has to be spoken...ex: the Kanji when it is sent to the TextField

Perhaps, one day 😀,you will also ask me to support Yō-on which is supported in Japanese Braille

shinya.ta

@cvp

I took a test.
It's great.

And I'd like to have a text field and a speech on the conversion list.

cvp

@shinya.ta Finish for today, I have a dinner outside.
Tomorrow, mothers' Day, thus not a lot free
Monday should be ok to go with the program, sorry for the delay

Did you check the words with prefix?
Did you test with custom keyboard in another app?

shinya.ta

@cvp

I tested the prefix.

It functioned normally.
The test for other applications is not yet done.
Just a moment, please.

shinya.ta

@cvp

http://www.yoihari.com/tenji/tyou.htm

http://www.yoihari.com/tenji/tsuji.htm

http://www.yoihari.com/tenji/tkigo.htm

This Braille is also necessary.
There are some other details, but I don't remember well, so the necessary Braille is only this.

cvp

@shinya.ta It becomes really complicated, let me some time to try to understand...

cvp

@shinya.ta The Yō-on table that you link is a katakana list, not hirgana

For instance, are you sur that you want キャ instead of きゃ

It is important to decide before I begin this very complex part...

shinya.ta

@cvp

The list is displayed in Katakana, but there is no distinction between Hiragana and Katakana.
Because, for visually-impaired people, the distinction between Katakana and Hiragana is irrelevant to reading a document.

http://www.yoihari.com/tenji/omotegazo.html