pip install gestures, WKWebView, UI animations and more

mikael

@becktrex , encoding error could point to some py2 issue, not sure if that helps any.

mikael

Error matches a stash issue.

mikael

@becktrex, are you running the latest stash? (selfupdate)

bennr01

would appreciate any hints on how to debug this?

In general, stashconf py_traceback 1, stashconf py_pdb 1 and pip --verbose install pythonista-gestures.

I just tried and could not replicate the error (it installs successfully).

Error matches a stash issue.

I think that one is a different issue. StaSh pip has two installers: one for source install (via setup.py) and one for wheels (.whl). The linked issue was regarding the source install, while this issue is with wheel installations. Also, I think we already fixed the linked issue, but I am not sure...

mikael

@becktrex, if pip will not co-operate, you can just as well open stash and:

cd site-packages
wget https://raw.githubusercontent.com/mikaelho/pythonista-gestures/master/gestures.py

becktrex

StaSh v0.7.2 on python 3.6.1
pythonista V. 3.4 (330025)
iphone 6S+
iOS 13.3.1
StaSh "selfupdate" returns "Already at latest version"

I've tried this over the last couple of days. Restarted Pythonista, rebooted iphone, etc. with the same result.

I tried pip install again with the above "extras", no joy, results below.

wget from the site-packages directory worked fine.
time to play with my new ̶t̶o̶y̶s̶ tools


[~/Documents]$ stashconf py_traceback 1
[~/Documents]$ stashconf py_pdb 1
[~/Documents]$ pip --verbose install pythonista-gestures
Querying PyPI ... 
Using pythonista-gestures==1.0...
A binary distribution is available and will be used.
Downloading package ...
Opening: https://files.pythonhosted.org/packages/e0/76/e1766485ab9b521d9d4c304854f479b87db6df350dc54996aa5c71e4d608/pythonista_gestures-1.0-py2.py3-none-any.whl

Save as: /private/var/mobile/Containers/Data/Application/1596E9F5-6DC7-4159-8555-9611A7AEB2A8/tmp//pythonista_gestures-1.0-py2.py3-none-any.whl (10408 bytes)
     10408 [100.00%]
Installing wheel: pythonista_gestures-1.0-py2.py3-none-any.whl...
Extracting wheel..
Extraction finished, running handlers...
Running handler 'WHEEL information checker'...
Wheel generated by: flit 2.2.0
Running handler 'dependency handler'...
Cleaning up...
<class 'UnicodeDecodeError'>: 'ascii' codec can't decode byte 0xe2 in position 1125: ordinal not in range(128)
Traceback (most recent call last):
  File "/private/var/mobile/Containers/Shared/AppGroup/16663993-01D5-4358-99D0-C11426AFFF9B/Pythonista3/Documents/site-packages/stash/system/shruntime.py", line 547, in exec_py_file
    exec(code, namespace, namespace)
  File "site-packages/stash/bin/pip.py", line 1492, in <module>
    repository.install(pkg_name, ver_spec, dist=dist)
  File "site-packages/stash/bin/pip.py", line 1085, in install
    self._install(pkg_name, pkg_info, archive_filename, dependency_dist=dist)
  File "site-packages/stash/bin/pip.py", line 849, in _install
    files_installed, dependencies = wheel.install(self.site_packages)
  File "/private/var/mobile/Containers/Shared/AppGroup/16663993-01D5-4358-99D0-C11426AFFF9B/Pythonista3/Documents/site-packages/stash/lib/stashutils/wheels.py", line 385, in install
    tfi = handler.handle_install(tp, targetdir)
  File "/private/var/mobile/Containers/Shared/AppGroup/16663993-01D5-4358-99D0-C11426AFFF9B/Pythonista3/Documents/site-packages/stash/lib/stashutils/wheels.py", line 286, in handle_install
    dependencies = self.read_dependencies_from_METADATA(metadatap)
  File "/private/var/mobile/Containers/Shared/AppGroup/16663993-01D5-4358-99D0-C11426AFFF9B/Pythonista3/Documents/site-packages/stash/lib/stashutils/wheels.py", line 310, in read_dependencies_from_METADATA
    for line in fin:
  File "/var/containers/Bundle/Application/FC2E1425-424E-4F22-88E8-DDBC98DBC701/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/encodings/ascii.py", line 27, in decode
    return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1125: ordinal not in range(128)
> /var/containers/Bundle/Application/FC2E1425-424E-4F22-88E8-DDBC98DBC701/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/encodings/ascii.py(27)decode()
-> return codecs.ascii_decode(input, self.errors)[0]
(Pdb)

bennr01

After looking into this issue for a bit, it seems like the same bug as in Issue #364. This should have been fixed 12 months ago, just a month after the latest version bump for master. So it is possible that you have a version installed before that version bump.

So, since it seems like the master branch became a bit outdated,I just merged 152 commits from dev into master. This should include the fix as well as a version bump, so could you please try another selfupdate?

becktrex

That did the trick.
selfupdate was successfull.

"pip install pythonista-gestures" installed the first time.

mikael

@bennr01, a big thank you! for all you do to keep us stashed & pipped.

bennr01

@mikael said:

@bennr01, a big thank you! for all you do to keep us stashed & pipped.

It's always a pleasure. Though in this case, the fix was made by yjqiang.

Drizzel

@mikael Just a tiny correction, please correct me if I’m wrong. In the multipeer readme it says one should use <pip install multipeer> to install your module, which doesn’t work. You probably meant <pip install pythonista-multipeer>.

mikael

@Drizzel, thank you, fixed. Multipeer was my first PyPi exercise, and my naming convention was still evolving – meaning, I did not yet know how to give a module a different name in site-packages and PyPi. :-)

Anxietier

Hi, I tested one demo code in readme of pythonista-wkwebview

class MagicWebView(WKWebView):
  
  def on_magic(self, message):
    print('WKWebView magic ' + message)
    
html = '''
<body>
<button onclick="window.webkit.messageHandlers.magic.postMessage(\'spell\')">
Cast a spell
</button>
</body>
'''

v = MagicWebView()
v.load_html(html)

Well it works good, but when I try to load html file, the 'on_magic' doesn't work, here's my code in py file

class MagicWebView(WKWebView):
	def on_magic(self, message):
		print('WKWebView magic ' + message)

v = MagicWebView()
v.present()
# v.load_html(html)
v.load_url('test.html', no_cache=False, timeout=5)
v.clear_cache()

I don't know how to fix it

cvp

@Anxietier try

import os

w = WKWebView()
f = os.path.abspath('test.html')
print(f)
w.load_url(f)
w.present()

mikael

@Anxietier, I see the online documentation covers this poorly. Here’s the method docstring:

Loads the contents of the given url asynchronously.

If the url starts with file://, loads a local file. If the remaining url starts with /, path starts from Pythonista root.

For remote (non-file) requests, there are two additional options:

Set no_cache to True to skip the local cache, default is False
Set timeout to a specific timeout value, default is 10 (seconds)

mikael

@Anxietier, you can get this and similar documentation on other methods using the help function, e.g. in Pythonista console:

>>> import wkwebview
>>> help(wkwebview.WKWebView.load_url)

Anxietier

@cvp
thanks, but it seems doesn’t work, here’s my test code

file_name = 'test.copy(2).html'
file_abs_path = os.path.abspath(file_name)
url_file_name = 'file://' + file_name
url_file_abs_path = 'file://' + file_abs_path

with open(file_name, 'r', encoding='utf8') as f:
	html = ''.join(f.readlines())

v = MagicWebView()
v.present()

# v.load_html(html) # can load but button doesn't work

# v.load_url(file_name, no_cache=False, timeout=5) # can load but button doesn't work

# v.load_url(file_abs_path, no_cache=False, timeout=5) # can load but button doesn't work

# v.load_url(url_file_name, no_cache=False, timeout=5) # would let ista crash or load faild

# v.load_url(url_file_abs_path, no_cache=False, timeout=5) # doesn't load

v.clear_cache()

Anxietier

@mikael
I’m not sure if I described my issue clearly, and here’s my another test code, perhaps that would be clearly

file_name = 'test.copy(2).html'
file_abs_path = os.path.abspath(file_name)
url_file_name = 'file://' + file_name
url_file_abs_path = 'file://' + file_abs_path

with open(file_name, 'r', encoding='utf8') as f:
	html = ''.join(f.readlines())

v = MagicWebView()
v.present()

# v.load_html(html) # can load but button doesn't work

# v.load_url(file_name, no_cache=False, timeout=5) # can load but button doesn't work

# v.load_url(file_abs_path, no_cache=False, timeout=5) # can load but button doesn't work

# v.load_url(url_file_name, no_cache=False, timeout=5) # would let ista crash or load faild

# v.load_url(url_file_abs_path, no_cache=False, timeout=5) # doesn't load

v.clear_cache()

mikael

@Anxietier, I will have to look at this, maybe something has changed in recent iOS versions.

Meanwhile, this:

html = ''.join(f.readlines())

... looks funny, breaking and joining with no change. Just html = f.read() should work fine.

mikael

@Anxietier, I placed this script:

import wkwebview

class MyWebView(wkwebview.WKWebView):
    
    def on_magic(self, message):
        print('WKWebView magic ' + message)

wv = MyWebView()
wv.present('fullscreen')

wv.load_url('load_url.html')

... and this HTML as the file load_url.html in the same directory:

<body>
<button onclick="window.webkit.messageHandlers.magic.postMessage('spell')">
Cast a spell
</button>
</body>

And the button works fine. Note that I removed the backlashes in the onclick handler as escaping not necessary in a file.

I suspect you might have some kind of non-printing character issue.