Welcome!
This is the community forum for my apps Pythonista and Editorial.
For individual support questions, you can also send an email. If you have a very short question or just want to say hello — I'm @olemoritz on Twitter.
Flick button keyboard.
-
I'm sorry. It's not the reaction speed of the tap.
Please set the response speed of the tap to the fastest of the last time.
What I want to say is that the display position of character selection after tapping is not right above the character, so it reacts to the character on the upper side of the selected character with only a little movement of the finger.
So, I would like you to put the display of character selection a little more on the top. -
@shinya-ta said
lease set the response speed of the tap to the fastest of the last time.
What I want to say is that the display position of character selection after tapping is not right above the character, so it reacts to the character on the upper side of the selected character with only a little movement of the finger.
So, I would like you to put the display of character selection a little more on the top.Did you test the new version before posting this text? Please confirm
Normally, with this new version, tapping a letter of first line works.
And I can't put the display of the blue keys more on the top, I can't go outside the authorized area.the display position of character selection after tapping is not right above the character,
That's, we know it, it is the only solution to display the up sub-key while staying in the authorized area.
or we have to put the up key at another place
Another solution could be to have smaller height for buttons so the free top row could be enough high to allow the upper flicked keys to not overlap. Tell me if you want a special version for testing this.
-
@cvp said
- version 00.38 is available with
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
Like this version, voice over will respond even if the button is hidden.
However, if you hide it this much, the design is bad, so I would like to have it between the current version and the previous version.
-
@shinya-ta I understand but you had asked that I magnify the blue sub-keys. Do you mean now that you want no more this magnification?
-
I want this magnification, but I want you to move the place a little more.
-
I'd like you to reduce the magnification of the buttons a little as a trial.
-
@shinya-ta I've modified the magnification differently for the 3 letters of the first row of Hirgana, so you could test which seems the best.
version 00.47 is available with
modifications
- for trying: flicked sub-keys magnified, instead of 1.3,
of 1.0 for あ
of 1.1 for か
of 1.2 for さ
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
- for trying: flicked sub-keys magnified, instead of 1.3,
-
I had my wife touch it.
As a result, I could enter fewer mistakes with the "あ" button.
You may be able to use the “か”button once you get used to it, but it seems to be difficult.
I couldn't use the “さ” button at all.My wife prefer the "あ" button.
Also, please make the response speed of the tap the shortest.
-
@shinya-ta version 00.48 is available with
modifications
- remove magnification of flicked sub-keys versus flicking key size
- reset the long press duration from 0.1 to 0.01 second
but so, no real way to really tap on the flicking key
your finger always stays more than a 0.01 second on the screen,
thus a tap is processed as a very short (long) press
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
-
Thank you. My wife can use it now.
I want to make it close to the standard keyboard.
Please change the layout of the flick input button.Third line.
数字,カタカナ,ま,や,ら,定型文,漢字
Fourth line.
絵文字,小文字,濁点,わ,、。,記号,“ return
I ignored it because it was Hiragana that I didn't use often, but it was attached to the standard keyboard.
Please add small letters "ゎ" and "ヮ".
Personally, I found the zoom button attractive.😊
-
@shinya-ta version 00.49 is available with
modifications
- add small letters "ゎ" and "ヮ"
- change Hirgana layout
3rd line: 数字,カタカナ,ま,や,ら,定型文,漢字
4th line= 絵文字,小文字,濁点,わ,、。,記号,“ return
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
-
Probably, it will be completed in a little while.😊
If you convert five or more Kanji characters, the Kanji selection field becomes too wide. Up, down, and OK buttons are hidden, so it's difficult to tap.
Is it possible to shorten the width of the Kanji selection column?
As an example.
じょうだん→冗談(Meaning of a joke.)
-
@shinya-ta in my afternoon, I’m at hospital, waiting for a last petscan before operation of Friday…
-
I'm worried about you. I'd like to visit you.
Is there a way to know that cvp is logged in by e-mail on this site?
-
Also, from the symbol page, please place the button to return to the Hiragana page to the right of the ")" button.
-
@shinya-ta said
I'm worried about you. I'd like to visit you.
Is there a way to know that cvp is logged in by e-mail on this site?
You're very kind. I think that if you open an issue in a GitHub file, I'll get an email but the text would be public.
Privacy is important.
And be optimistic , I feel fine. Thanks for worrying about me -
@shinya-ta version 00.50 is available with
modifications
- from the symbol page, place the button to return to the Hiragana page to the
right of the ")" button.
corrections
- If you convert five or more Kanji characters, the Kanji selection field
becomes too wide. Up, down, and OK buttons are hidden
Font size will be set to show all letters of temporary storage and first
element of list will never hide buttons
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
- from the symbol page, place the button to return to the Hiragana page to the
-
Please make the button layout of the Katakana page the same as Hiragana.
3rd line: 数字,平仮名,マ,ヤ,ラ
4th line= 絵文字,小文字,濁点,ワ,、。,記号,“ returnAlso, I want you to input the buttons of symbols other than numbers on the page of numbers directly instead of putting them in the temporary storage.
-
@shinya-ta version 00.51 is available with
modifications
- layout of the Katakana page the same as Hiragana.
3rd line: 数字,平仮名,マ,ヤ,ラ
4th line= 絵文字,小文字,濁点,ワ,、。,記号,“ return - input the buttons of symbols other than numbers on the page
of numbers directly instead of putting them in the temporary storage.
https://raw.githubusercontent.com/cvpe/Pythonista-scripts/master/Emojis_Keyboard.py
- layout of the Katakana page the same as Hiragana.
-
We're almost there.😊
Can I display the selection field of the flick input button at the normal tap speed instead of the long tap?
The following characters can be entered immediately :.
あ,か,さ,た,な,は,ま,や,ら,わ
ア,カ,サ,タ,ナ,ハ,マ,ヤ,ラ,ワI can input the first button right away, but the input speed of characters after flick selection is slow.
Can I set the speed letters at the same speed as the normal button?With the normal flick input button of iPhone, you can input even if you move faster than the selection input field appears.
My wife's finger movements are almost the same as those of a healthy person, so I'm a little troubled.
Is this the limit of pythonista?